How To Use
Complete Instructions
Step 1: Prepare and Power On
- 1
Clean the sampling area
Use an alcohol wipe or suitable disinfectant to thoroughly clean your fingertip or the selected sampling area. This ensures hygiene and accurate results. - 2
Insert the test strip
• If using uric acid (UA) test strips for the first time, insert the UA code card before the test strip.
• Insert the test strip securely. The device will power on automatically and be ready for use.
Step 2: Select Sampling Mode
- 1
Adjust the lever and choose the sampling level
Pull out the lever and select the appropriate laser intensity level for blood sampling. This allows for a comfortable and efficient collection experience. - 2
Position your finger on the laser window
Place your finger firmly on the laser sampling area, applying consistent pressure. - 3
Activate the laser
When the laser emission button light turns green, press the button to activate painless laser sampling.
Step 3: Collect and Measure
- 1
Facilitate blood flow
Gently press your finger 2-3 times to encourage sufficient blood flow. - 2
Wipe the first drop
Use a cotton swab to gently remove the first drop of blood, as it may contain contaminants or skin residues. - 3
Apply the second drop to the test strip
Align the test strip with the second drop of blood. Ensure the blood fully contacts the strip. - 4
Automatic siphon measurement
The device will beep once the sample is detected. Allow it to automatically siphon and measure the sample. Do not move the strip or the device during this process.
Step 4: View and Record Results
- 1
Wait for the countdown to complete
Once the measurement is finished, the device will display the results, including:
• Sampling level
• Concentration values (e.g., uric acid or blood glucose)
• Measurement units, date, time, battery status, and network status (if applicable). - 2
Remove the test strip
Safely remove the used test strip and dispose of it according to your local guidelines.
